CuproBraze Alliance: An International Alliance for the CuproBraze Heat Exchanger Technology

CuproBraze Alliance: An International Alliance for the CuproBraze Heat Exchanger Technology

Resources

Forum start - Register
Name Password Forgot your password?

Forum start > CuproBraze Forum > CuproBraze Technology > Cuprobrazed Heat Exchanger in USA
Quickview 
Author
Thread
kumor
Member


 

Location: 
Registered: 3/9/2009    Warnings: 0
Cuprobrazed Heat Exchanger in USA
After reading excellent article in December 2008 issue of Machine Design I tried to locate a company in US that could quote a heat exchanger made using this technology. It appears to me that all companies listed on Alliance members list are outside US. Is this possible? I hope I am wrong. Please let me know if you know of a company in US that I could contact.

Advanced Energy makes grid-tied inverters for solar installations. For our European model we need higher performance cooling and brazed heat exchanger seems like just the right answer. Thanks in advance.


Gregory Kumor
Advanced Energy Industries
Fort Collins, Colorado
970 407 6837
__________________
Gregory Kumor
Advanced Energy Industries
3/9/2009 13:48 Link - Ip: Logged - Quote:
Markku Ainali
Member


 

Location: Vasteras, Sweden
Registered: 12/20/2008      Warnings: 0
Dear Mr. Kumor,
The map of the "CuproBraze World" section shows that there are several CuproBraze heat exchanger manufacturers in US. In addition, there is one manufacturer about to start production in Mexico. Some of these companies have been introduced in ICA Executive Reports (See "Literature"). Also, some of the European CuproBraze producers are exporting to US. I will give you more details by direct mail.
Thanks for your interest!
Markku Ainali
3/22/2009 05:21 Link - Ip: Logged - Quote:
kumor
Member


 

Location: 
Registered: 3/9/2009      Warnings: 0
Mr. Ainali,

I did manage to find two companies in US that were listed as using cuprobraze method (one in Texas and one in the east USA). I have to find the names in my notes. The company in Texas ceased operations and I believe was bought by Luvata (Finland?). The other moved operations elsewhere but due to the indifference of the person on the phone I was not able to find out where to call. I am still pursuing this thread but if you have any other information I will greatly appreciate it if you share it withe me! Thanks.
Gregory Kumor
__________________
Gregory Kumor
Advanced Energy Industries
3/23/2009 09:57 Link - Ip: Logged - Quote:
Markku Ainali
Member


 

Location: Vasteras, Sweden
Registered: 12/20/2008      Warnings: 0
Mr. Kumor,
I have sent you a list of five North American CuproBraze suppliers by mail. Luvata is not a stock holder in any of them. However, they are customers to Luvata, purchasing CuproBraze materials.
Markku Ainali
3/24/2009 14:30 Link - Ip: Logged - Quote:
Forum start > CuproBraze Forum > CuproBraze Technology > Cuprobrazed Heat Exchanger in USA

Quick reply
 You need to login before you can post.
The CuproBraze Alliance's message boards are a public forum for the sharing of knowledge about CuproBraze technology. These message boards are moderated by CuproBraze Alliance members who will respond to your technical inquiries. If you are not a member of the CuproBraze Alliance then you must register before you can post a message. Comments and inquiries from non-members will be posted at the discretion of members. While the Alliance encourages the a free flow of information and ideas on the boards, it adheres to a basic code of conduct. Please do not post copyrighted materials without the direct permission of the owner of said copyright, trademark or other proprietary right. In addition, profanity or inflammatory language is not permitted.